Skip to main content
FREE Delivery!|(213) 566-1318

San Mateo County, California ยท Free Delivery

Bulk Gravel Delivery to San Bruno, CA

Free delivery to San Bruno on every order, with loads arriving in as fast as 2 business days.

Delivering to San Bruno, CA

Free delivery on every order.

  • Free delivery to San Bruno
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to San Bruno

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to San Bruno

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to San Bruno

Decorative delivered to San Bruno

Rounded stone for beds, borders and water features.

Sand delivered to San Bruno

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to San Bruno

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to San Bruno

How delivery to San Bruno works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to San Bruno.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most San Bruno addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Planning a patio, a driveway, or a drainage run? California Rock Supply handles gravel and aggregate delivery in San Bruno, CA, and most flatwork here starts with Class 2 base. It is the base material Caltrans specifies as Class 2 aggregate base, and local crews call it class ii base or base rock.

San Bruno sits in San Mateo County, where soils swing between sandy ground near the shoreline and heavy clay that swells when wet. That mix decides how a patio pad or drive is built and bedded.

Ground and Conditions in San Bruno

A thin base is where patios and drives fail first. On clay, water sits instead of draining, the pad moves, and pavers rock or settle out of line. That is why a compacted Class 2 base layer matters more than the surface material on top.

Sandy ground near the shoreline takes water fast. Clay in the Coast Range valleys and hills does the opposite, and winter storms deliver most of the rain in a few large events. Erosion shows up on steep slopes and along sea bluffs, where rip rap, also called rock slope protection, armors banks and culvert outlets.

The dry season from late spring into fall is the main window for base, driveway and paver work. Summer fog near the shore is not the problem; saturated clay is, and it holds jobs up until the ground dries.

Materials for San Bruno Projects

Bedding and base under pavers and flatwork is the core of most San Bruno orders. Class 2 base carries the load under a patio, a walkway or a slab, and it compacts firm so the surface above stays flat. Recycled base rock, also called recycled class 2 base, does the same job when made from Road Base or asphalt, and Caltrans allows processed reclaimed material in aggregate base.

Above the base, Stone Screenings, also called DG, packs into a firm path or patio surface with a fine, walkable finish. Washed sand, also called concrete sand, levels and beds pavers and slabs, and mason sand, or masonry sand, fills joints and works for brick and block.

For drives, driveway gravel surfaces an existing drive or tops a compacted Class 2 base. Walkway gravel gives paths a finer, walkable finish. Where water has to move, drain rock and 3/4 inch drain rock (also called #57 stone) are clean stone with no fines, so water passes through instead of pooling.

Crusher run is another option for drives and pads where a binding, compacting material is wanted, though California buyers more often ask for Class 2 base for the same job. Fill dirt, or structural fill, raises grade and backfills before the base goes down.

Yards and beds round out the list. Topsoil, also called screened topsoil, builds up planting areas over clay or hardpan, garden soil fills raised beds, and shredded mulch holds moisture through the long dry season.

Delivery to San Bruno and the Surrounding Area

You order online and choose a quantity by the ton or by the yard. If you are not sure which one fits your job, size the load with the calculator before you check out, then pick a delivery date that works for your site.

A dump truck delivers bulk material to your address in San Bruno and the surrounding area. We also deliver to San Mateo, Daly City, Redwood City, South San Francisco and Pacifica, all in San Mateo County.

Here is a practical tip for a tight driveway or a small patio job: get your pad and access ready before the truck arrives, and keep the drop spot clear so the pile lands where you want to shovel from.

Size Your Load and Place Your Order

Whether you are bedding pavers, topping a drive, or running drainage, the calculator gets you the right quantity by the ton or the yard. Pick your material, set the amount, and choose a delivery date at checkout.

California Rock Supply delivers bulk gravel, stone, sand, topsoil and Class 2 base across San Bruno and San Mateo County. Start your order online whenever your site is ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in San Bruno, CA

What gravel is best for a driveway in San Bruno?

Start with Class 2 base for the compacted layer, then top it with driveway gravel. Class 2 base is the standard California base material, specified as Class 2 aggregate base, and it carries the load without shifting. On the clay soils common in the hills, a firm base layer keeps the surface above it from rutting when the winter rain arrives.

How much material will my project need?

It depends on the area you are covering and how deep the layer goes. Use the calculator on the product page to size the load by the ton or the yard, so you order close to what the job takes. If the number looks off for your site, adjust the depth or the area and check it again before checkout.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.