Skip to main content
FREE Delivery!|(213) 566-1318

Orange County, California ยท Free Delivery

Mason Sand for Patios in Lake Forest, CA

Free delivery to Lake Forest on every order, with loads arriving in as fast as 2 business days.

Delivering to Lake Forest, CA

Free delivery on every order.

  • Free delivery to Lake Forest
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Lake Forest

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Lake Forest

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Lake Forest

Decorative delivered to Lake Forest

Rounded stone for beds, borders and water features.

Sand delivered to Lake Forest

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Lake Forest

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Lake Forest

How delivery to Lake Forest works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Lake Forest.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Lake Forest addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

California Rock Supply handles gravel and aggregate delivery in Lake Forest, CA for two kinds of buyers: contractors running paver and flatwork crews, and homeowners bedding a patio behind the house. Both usually start with Class 2 base, the standard California base material, then finish with sand under the pavers.

Soils here run from sandy loam to expansive clay, and that clay is what decides how the bedding and base go down.

Ground and Conditions in Lake Forest

Expansive clay swells when it gets wet and shrinks and cracks as it dries. A thin base over that movement shows up as rocking pavers, open joints and cracks across a slab or patio.

The fix is a compacted Class 2 base thick enough to bridge the clay, plus drainage that carries winter storm runoff away instead of letting it sit under the paving.

Rain arrives in a few hard winter storms after a long dry season. It runs off hardscape, dry ground and clay fast, so a drainage layer matters as much as the base itself.

The long, warm, dry season suits base and paver work for most of the year. Winter storm days are the main interruption, and the first heavy storms also move debris off burned hillsides and canyons.

Materials for Lake Forest Projects

Under pavers and flatwork, the bedding layer is what carries the load and keeps joints tight. Mason sand packs firm and even, so brick and block courses sit flat and paver joints fill cleanly. Its fine, uniform grain also suits play sand and sandbox use.

Below the bedding, Class 2 Base is the standard California base material, specified by Caltrans as Class 2 aggregate base. It goes under driveways, parking pads and the compacted base beneath pavers, slabs and Stone Screenings paths.

Recycled base rock, made from Road Base or asphalt, does the same job under drives, patios and slabs. Caltrans allows processed reclaimed asphalt and concrete in aggregate base, so it is a practical choice underneath pavers when you want to keep the base compacted and stable.

For paths and low-water ground cover, Stone Screenings packs firm and fine over a compacted base. For walkways that need a finer, walkable surface, Walkway Gravel is the lighter option.

Delivery to Lake Forest and the Surrounding Area

You order online, pick a quantity by the ton or by the yard, and choose a delivery date at checkout. A dump truck then brings the material to your site.

Choosing between tons and yards is the part buyers ask about most. Sand, base and stone are usually sold by weight, while some materials are easier to think about by volume. The calculator sizes the load either way.

Sizing the load starts with the area you are covering, not with a guess. Measure the patio, drive or bed, put those numbers into the calculator, and order the quantity it returns.

Delivery covers Lake Forest and the rest of Orange County, including Anaheim, Santa Ana, Irvine, Huntington Beach and Garden Grove. Give the driver a clear drop spot, since a loaded truck needs room to spread its load and turn around.

What gravel is best for a driveway in Lake Forest?

Start with Class 2 base, since it compacts into a firm, stable layer over the clay soils here. Top it with driveway gravel if you want a finished surface, or leave the base exposed where a plain compacted drive suits the site. Add drain rock along the edges where runoff collects after winter storms.

How much material will my project need?

Measure the length and width of the area, then set the depth you want for the base or bedding layer. Enter those numbers into the calculator, and it sizes the load in tons or yards for that area. If your project has more than one layer, such as base plus bedding sand, run each layer separately and add the results together.

Order Base, Sand and Stone for Your Lake Forest Project

Work out the area, let the calculator size the load, and order the material when the numbers look right. California Rock Supply delivers bulk gravel, Class 2 base, sand, stone and topsoil across Lake Forest and Orange County, so you can place the order online and pick your delivery date.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Lake Forest, CA

What gravel is best for a driveway in Lake Forest?

Start with Class 2 base, since it compacts into a firm, stable layer over the clay soils here. Top it with driveway gravel if you want a finished surface, or leave the base exposed where a plain compacted drive suits the site. Add drain rock along the edges where runoff collects after winter storms.

How much material will my project need?

Measure the length and width of the area, then set the depth you want for the base or bedding layer. Enter those numbers into the calculator, and it sizes the load in tons or yards for that area. If your project has more than one layer, such as base plus bedding sand, run each layer separately and add the results together.

Where will the material be placed?

Wherever you tell us, as long as the truck can safely reach it. Mark the spot before the delivery and someone should be on site to point the driver to it. If nobody can be there, leave clear instructions when you order and we will follow them.