Fill and Base Material Delivered in Fillmore, CA

California Rock Supply handles gravel and aggregate delivery in Fillmore, CA. The material most Fillmore jobs start with is Class 2 base, the standard California base rock for driveways, parking pads and the compacted layer under pavers and slabs. Fillmore sits on alluvial ground in Ventura County, where soils run from Top Soil to clay that swells when wet. That ground decides how much fill and base a pad needs.

Delivery to Fillmore and the Surrounding Area

Order online and pick your material, then choose a quantity by the ton or by the yard. If you are unsure how much you need, the calculator sizes the load for you. Pick a delivery date at checkout and a dump truck brings the material to your site.

Bulk delivery works best when the driver has a clear, firm spot to dump. Think about where the pile needs to land before the truck arrives, because a full load is heavy and will not move by hand. We deliver across Fillmore and to other parts of Ventura County, including Oxnard, Thousand Oaks, Simi Valley, Camarillo and Moorpark.

Materials for Fillmore Projects

Most Fillmore work starts below the surface. Building up grade and setting a pad come first, and the material you choose for that layer decides how the rest of the job holds up. Class 2 base, also called Class II base rock, is the standard material for driveways, parking pads and the compacted base under pavers, slabs and Stone Screenings paths.

For raising grade and backfilling, start with Fill Dirt. It builds up a pad before any base goes down. From there, Class 2 Base is the compacted layer that carries the load. Where a recycled material fits the same job, recycled base rock and crushed miscellaneous base are options to ask about.

• Class 2 Base for driveways, parking pads and sub-base under pavers and slabs.
• Driveway Gravel to surface an existing drive or top a compacted base.
• Stone Screenings, or DG, for paths, patios and low-water ground cover laid over a compacted base.
• Top Soil for lawn and bed prep over clay or sandy native ground.

Ground and Conditions in Fillmore

Fillmore ground runs from Top Soil to clay, and expansive clay is common in the basins and hills. That clay swells when wet and shrinks and cracks when dry, so an under-built base will not stay flat for long.

Water is the other half of it. Rain arrives in a few winter storms and atmospheric rivers after a long dry season, then runs off hardscape, hard dry ground and clay fast. A pad that was not built up and compacted properly will move under a slab or driveway.

The long, warm, dry season suits base and paver work for most of the year. Winter storm days are the main interruption. On burned hillsides and canyons, the first heavy storms can send debris flows, which is why slope and creek bank armoring matters here.

Order Class 2 Base and Fill for Your Fillmore Project

Class 2 base is the material most Fillmore jobs are built on, and it works best over fill that has been built up and compacted first. Start with your grade, then set your base. Order online, size your load with the calculator, and pick a delivery date for your Fillmore site.